Tuesday, May 17, 2022
Home Decorating DIY built in Kallax closet hack

DIY built in Kallax closet hack

How to create tons of storage for bulky items in the closet! These cubby units hold a TON and look great. 

I’ve been planning my closet makeover for some time now…and my plans for the space have changed more times than I can count! 

They have continued to change in real time as I’ve been working on it, but that’s part of the fun for me. 

Planning the organization, in your main closet especially, is something you really don’t want to mess up. It’s a lot more detailed and expensive than a smaller closet. 

Our recent coat closet makeover inspired me to get moving on this one. I was just so tired of the constant clutter and mess in my “hers” closet.

We didn’t pay extra for melamine or custom shelving when we built our house four years ago — as much as I HATE wire shelving, I knew it would take me awhile to figure out the layout I wanted. 

Paying for anything more felt like a waste of money at the time. I’m REALLY glad we waited…because now it’s coming together just as I had hoped. I’ll have a spot for EVERYTHING. 

I started off my closet redo with this corner. It was the biggest thorn in my side, just because it was so cluttered: 

This post may contain affiliate links for your convenience. 

As you can see, I had a lot of tall hanging storage available. Problem is, I don’t need that much for dresses and long items. 

Instead I used it for the much needed dresser instead — that part was very functional. 

I had an idea to create a home base for most of my folded clothes and it’s working beautifully

First up, I needed to remove all of the wire shelving in that corner. 

FUN TIMES. You’ll need a flat edged tool like a flat screwdriver, as well as something to pry the hardware off the wall, like a hammer or crow bar: 

how to remove wire shelving

You’ll need to take those metal pins out first — don’t try to attempt removing the shelving with that still intact! You’ll end up with giant holes in your walls. 

Once you get them pulled out a bit they come out very easily. You can pull them out by hand sometimes as well. 

Once the pin is out, you can remove the plastic brackets that hold the wire shelving up:

removing wire shelving hardware

Repeat this 485 times. 

You’ll be left with Swiss cheese walls full of holes: 

empty closet nook

By the way, I don’t fill every hole. If it will be covered permanently then I don’t fill them. (Unless it’s abnormally large.) 

Next up, I had to ensure my new closet units would fit right up against the walls. This is key to getting a more custom, built in look…no matter what room you’re working in. 

I used my reciprocating saw to cut into the baseboards where the storage units would end: 

cutting baseboards with saw

I knew I wanted some bling in here…that back wall isn’t huge so I could do something fun. Enter my easy go-to for accent walls…wallpaper of course! 

metallic pink peel and stick wallpaper

When you purchase wallpaper, make sure you grab more than enough of what you’ll need, and look to confirm that they are the same lot number: 

wallpaper lot numbers for matching

Like tile and flooring, different lot numbers can have slight differences that you may notice right up against each other. 

Then it was time for ALL the storage!! I was inspired by a wall of cubby units that my friend Carli used in her son’s closet makeover. I shared her project with a bunch of other gorgeous closets here

I was so excited to get these put together…

IKEA Kallax nine unit

I was so excited, I didn’t even take a picture of the progress, but I hung two of these bins on the wall. I say hung, because you need to make sure and secure them to the walls with the brackets they provide. 

I grabbed some pretty rattan baskets from IKEA for the cubbies, but quickly realized they would be awful…at least with clothes. I love the look, but little bits of the wicker would get into and caught on the clothes. 

navy cubby bins from Target

They slide so much easier and are much cleaner for the clothes. 

I filled most of the 18 cubby units with all of my bulkier clothes that take up more space, like hoodies and sweaters:

storing bulky sweatshirts in bins

Most I placed in the bins, but some I have folded and stacked on the shelves as well.

I utilized all of this new storage space to organize my less used clothing like seasonal items — things like themed Halloween, fall and Christmas clothes. Since I don’t have many and don’t wear those often, they went to the top of the unit. 

I also have some Disney shirts and sweaters I only wear on our trips, so those went into the top bins as well. 

label clips for cubby bins or baskets

I haven’t labeled them just yet — I want to wait until I get the entire closet done. 

I can’t even tell you how nice it was to get all of this sorted!:

Kallax closet storage hack with drawers

They are perfect for little things like socks or jewelry: 

Kallax white drawer inserts

I love that I have a few empty spots to work with. The organizing part is my favorite! 

But where was all of that bulky clothing before it went into the bins you ask? 

Well…nicely folded and placed on the wire shelves of course: 

bulky sweaters and sweatshirts

Ha! Nope. 

Actually, I snapped this photo after I took the hoodies and sweatshirts off the shelf, so it looked way worse before. 

This was how most of my folded clothes were “organized” for the past four years. It obviously wasn’t working! 

Now it’s all perfectly sorted, organized and easily accessible: 

Kallax closet storage hack for clothes

I always strive to incorporate both form and function when working on a space. This little nook is the perfect example of both! 

I hope to make one more tweak to this spot, but IKEA is out of one of the items I’d like to use. I may have to DIY a solution instead. 

Here’s the before of this corner again to remind you of where I started: 

messy closet shoe bins before

Say it with me…no. more. wire. shelves! What a glorious day. 😁

Of course that corner was just the beginning…this redo got way bigger than I planned. But it’s turning out SO GOOD and I can’t wait to show you more progress soon! 

So far I’ve spent $240 for the Kallax units on this side of the room. The two cubby units were $80 each and the drawer inserts were $20. 

Have you used these Kallax units anywhere in your home? They would also work great inside a standard bedroom closet, with hanging rods attached on either side. 

Source link


DIY Powder Room Refresh With Simple Changes!

Beautiful DIY powder room refresh with peel and stick wallpaper and simple changes. Oh my...this may be my favorite room makeover in quite some...

DIY Powder Room Refresh With Simple Changes!

Beautiful DIY powder room refresh with peel and stick wallpaper and simple changes. Oh my...this may be my favorite room makeover in quite some...

Two New Shower Wall Tile Design Options – Addicted 2 Decorating®

After my original plan for the accent tile on the shower wall fell through, I gave it quite a bit of thought this...


Please enter your comment!
Please enter your name here

- Advertisment -

Most Popular

Rafael Nadal ready for Roland Garros despite injury issues

Nadal had said last week that daily training was a challenge and he would take a doctor with him to Paris after a...

Saha, Shami picked in Bengal Ranji squad for quarter-final

The Cricket Association of Bengal (CAB) also named fast bowler Mohammed Shami in the squad. However, his participation will need a clearance from...

LSG skipper K L Rahul: Nothing comes easy, we had to learn that the hard way

Lucknow Super Giants needed a win against Rajasthan Royals to book its berth in the Indian Premier League playoffs. But a 24-run defeat...

This is as big as it gets in Indian sport: Pullela Gopichand

Pullela Gopichand delivered one of India’s great sporting moments as a player, winning the All England title in 2001. As chief national coach,...

Recent Comments